Vehicle technology has evolved over the years. Reports indicate that fuel emission adds pollutants to the environment. Additionally, fuel prices have hiked in almost every part of the globe. Thus, motorists must look for alternative ways to conserve gas and protect the environment. OptiFuel is an innovative device that supposedly reduces fuel consumption by 35 percent. How does it work? Is it effective?
What is OptiFuel?
OptiFuel is advertised as an innovative “Fuel Saver” that is pocket-friendly and gentle on the environment. The creators describe it as easy to install, use, and 100% safe. Equally, users are likely to notice a substantial reduction in fuel usage and better horsepower and torque after installing it. The creator recommends attaching an OptiFuel device to your vehicle to tune the ECU to consume lower gas. The OptiFuel chip comes preprogrammed; thus, you only need to attach it to your car and start running it. The fuel-saving chip is eco-friendly and can aid in fighting against climatic change.
How Does OptiFuel Work
OptiFuel seeks to minimize the amount of carbon released into the atmosphere, thus benefiting the environment. It aids in reducing the amount of carbon your vehicle releases into the environment, therefore, combating climate change. The plug-and-play green tech saves you fuel money and augments the overall vehicle performance. OptiFuel is a cutting-edge chip that is lightweight and portable compared to similar products in the market. The maker states that it reprograms and remaps the ECU in your car to optimize fuel consumption depending on your driving habits.
OptiFuel comes already preprogrammed by the manufacturer. Optifuel users only need to plug it into their OBD2 port and plug it in. The maker states that you will notice more engine power and torque after installing the device. Similarly, OptiFuel starts saving gas immediately after installation. OptiFuel is compatible with almost any vehicle manufactured after 1996. The OBD2 primarily aids in remapping and reprogramming the vehicle’s internal ECU. OptiFuel reprograms the ECU after a 200 kilometers mileage to cut down on gas usage and reduce carbon emissions.
How to Install OptiFuel Fuel Saver
OptiFuel is user-friendly, and anyone who can locate the OBD2 port can install it. The cutting-edge technology can help you save on fuel and reduce carbon emissions. Below is a step-by-step guide on how to install the OptiFuel chip on your vehicle:
Step 1: Turn off the Vehicle
OptiFuel maker recommends putting the car in park and removing the ignition key from your vehicle.
Step 2: Locate OBD2 Port
The OBD2 port is a feature of cars made after 1996. The component is located in different places depending on the car’s make and design. Plug in the OptiFuel device in the OBD2 port
Step 3: ReIgnite the Vehicle
OptiFuel maker explains that you rotate the ignition key enough to power the dashboard.
Step 4: Wait for Communication between OptiFuel and ECU
After turning on the dashboard lights, push the reset button for five seconds. Wait for about half a minute for the fuel-saving device to communicate with the OBD2 system and ECU.
Step 5: Start the car completely.
After step five above, ignite the car completely for the OptiFuel to start working. However, it would be best if you had to travel about 150 miles for OptiFuel to adjust to your driving habits.
Benefits of OptiFuel Device
1. Money Savings
The fuel prices continue to escalate. OptiFuel can save you money at the pump. The manufacturer states that OptiFuel can help you save up to 35 percent of your car’s total fuel.
2. Add Power and Torque
Instead of investing in other devices, OptiFuel is a multifunctional chip that promises to augment the vehicle’s power and torque by 35-45%.
3. Small and Lightweight
OptiFuel is 100% portable, and you do not have to worry about cluttering your vehicle with a large accessory. OptiFuel chip is lightweight and concealable hence will not make your vehicle appear hideous.
4. Aid in Fighting Climate Change
Less fuel consumption implies that your vehicle emits less carbon. The all-season OptiFuel saver reduces gas usage and carbon emission, thus slowing down climate change.
5. Easy to Use
The OptiFuel fuel saver manual comes with a link to help you locate the OBD2 port. You can install the OptiFuel gadget at home without requiring the services of a mechanic.
OptiFuel saver is compatible with any vehicle manufactured after 1996, regardless of the make, design, and brand.
Purchasing OptiFuel Fuel Saver
You cannot get OptiFuel in local stores. It is only available on the official website. OptiFuel fuel saver is currently on discounts via the official website. The manufacturer offers free shipping and handling services on all domestic orders. It takes about seven days to ship OptiFuel to any part of the US. Making bulk orders of the fuel-saving chip enables you to save more.
OptiFuel saver is a plug-in-ready device compatible with all automobiles with a functional OBD2 port. The fuel saver chip is easy to install and safe for all vehicle types. The maker states that it is environmentally friendly and can help you save on gasoline money.
EcoPlus Reviews – Is the Eco Plus Fuel Saver Worth Buying or Scam?
The links contained in this product review may result in a small commission if you opt to purchase the product recommended at no additional cost to you. This goes towards supporting our research and editorial team. Please know we only recommend high-quality products.